歡迎來到 深圳市中建工科技有限公司 官網!
 
ENGLISH | 站點首頁 | 設為主頁 | 收藏本站
 
 
建筑檢測儀器專區
 
 
 建筑無損檢測儀器
 
 
 公路工程測試儀器
 
 
 交通工程檢測儀器
 
 
工業檢測儀器專區
 
 
 油墨涂料檢測儀器
 
 
 環境氣體檢測儀器
 
 
 木材樹木檢測儀器
 
 
品牌專區
 
 
 瑞士杰恩爾Zehntner
 
 
 英國易高Elcometer
 
 
 英國普洛蒂Protimeter
 
 
 愛爾蘭Tramex
 
 
 美國狄夫斯高DeFelsko
 
 
 德國HF SENSOR
 
首頁 >> 產品世界 >> 產品專區 >> 建筑無損檢測儀器 >> 美國NDT JAMES P-C-7300 Bond Test MK III粘結強度測試儀
   
 
[美國NDT JAMES P-C-7300 Bond Test MK III粘結強度測試儀]
 
     
  名    稱: 美國NDT JAMES P-C-7300 Bond Test MK III粘結強度測試儀
  型    號: P-C-7300 Bond Test MK III
  廠    家: 美國NDT JAMES
  用    途: 可由直接拉脫的方法量度混凝土、瀝青、磁磚、混凝土收復或其他表面物料的粘力或拉力。
 
 
 
  詳細介紹:    
 
    美國NDT JAMES P-C-7300 Bond Test MK III粘結強度測試儀可由直接拉脫的方法量度混凝土、瀝青、磁磚、混凝土收復或其他表面物料的粘力或拉力。
 
The James Bond Tester™ MK III or pull off adhesion test measures the bond strength or tensile strength of concrete, asphalt, tile, concrete repair, or other overlay material by the direct tension or pull off method. By pulling a 25mm steel disk attached to the material under the unit can,
  1. Measure the near surface strength of a substrate in order to determine the substrates quality before applying an overlay
  2. Determine the bond strength of a repair or overlay material after it is applied to the substrate
  3. Determine the tensile strength of a repair, overlay or adhesive after the material is applied to the surface
The James Bond Tester™ MK III  has been successfully used to verify the quality of existing materials, determine the adhesion strength of shotcrete, tile, epoxies, paint and other repair materials or coatings.
  • Each System comes with 10, 50mm 2 inch, ASTM Standard 1583 - 04  stainless steel disks
  • Customers who purchase this may also need the T-M-170 Moisture Master or T-HT-1000 Humitest for substrate moisture testing

Features and Benefits

·         Accurate bond strength of repair mortars, epoxy resins, laminates, overlays, and other coatings.
·         Calibrated gauge with maximum load indicator and mechanical damping.
·         Ball Joint Design for rapid testing as well as assuring direct tensile loading
·         Adjustable alignment plate with built in leveling facility for both vertical and horizontal pulls.
·         Compact design.
·         Easy to use.
·         Standards
o    ISO 4624 Paints and varnishes -- Pull-off test for adhesion
o    EN 1015-12 Methods of test for mortar for masonry. Determination of adhesive strength of hardened rendering and plastering mortars on substrate
o    EN 1348 Determination of Tensile Adhesion Strength for Cementitious Adhesives
o    BS 1881 Part 207 Testing concrete. Recommendations for the assessment of concrete strength by near-to-surface tests
o    ASTM C 1583 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
o    ASTM D 4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
o    ACI 503-30 Guide for the Application of Epoxy and Latex Adhesives for Bonding Freshly Mixed and Hardened Concretes
o    DIN 1048 Part 2 Testing concrete; testing of hardened concrete (specimens taken in situ)
Gauge Specifications
Range
Increments
Maximum Load Indicator
Mechanical Dampened Movement
Diameter
0.2 KN / 50 lbf
Yes
Yes
70 mm / 2.5"
1.0 KN / 200 lbf
Yes
Yes
70 mm / 2.5"
Diameter
Horizontal and Vertical Level
Easy Thumb Screw Adjustment Knobs
150 mm / 6"
Yes
Yes
Bond Test Puller Assembly
Diameter
Height
Maximum Load
60 mm / 2.5"
210mm / 8.125"
30 KN / 6675 lbf
Bond Test Assembly (Alignment Plate Attached to Bond Test Puller Assembly)
Height
Width
Weight
240 mm / 9.375"
3010 mm / 12.5"
5 Kg / 11 lbs.
James Bond Tester™ MK III in Case
Height
Width
Depth
Weight
410mm / 16"
508mm / 20"
205mm / 8"
14 Kg / 31 lbs
 
 
 
以上是美國NDT JAMES P-C-7300 Bond Test MK III粘結強度測試儀的詳細信息,如果您對美國NDT JAMES P-C-7300 Bond Test MK III粘結強度測試儀價格、廠家、品牌、型號、圖片、規范、規格、原理有疑問,或需要詳細報價單、宣傳冊、中英文產品說明書,請點擊我公司網站www.chievolution.com
 
美國NDT James相關產品介紹:
 
  資料下載:  
     
 
我需要“美國NDT JAMES P-C-7300 Bond Test MK III粘結強度測試儀”更詳細的信息
 
姓名   * 姓名不能為空
公司   * 公司名稱不能為空
電話   * 電話號不能為空,不少于7位數
E_mail  
留言  
驗證碼     
  
 
   
   
 
Copyright 2007~2017深圳市中建工科技有限公司 All Rights Reserved 备案编号:粤ICP备13075137号-1
   
 

深圳辦事處:深圳市龍崗區布吉百合星城B棟1812室 郵編:518112 電話:0755-89208840 傳真:0755-89208842 郵箱:info@ndtcci.com

 
 

主營產品:標線測厚儀|光澤度儀 |回彈儀|鋼筋定位儀|鋼筋銹蝕儀|超聲波檢測儀|水份儀|混凝土含水率測試儀|滲漏巡檢儀|微波濕度測試系統
主營品牌:瑞士杰恩爾Zehntner 英國易高Elcometer 美國NDT James 瑞士博勢Proceq 英國普洛蒂Protimeter 愛爾蘭Tramex 美國費舍爾Fisher 美國狄夫斯高DeFelsko

   
日本一级婬片A片在线观看